 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| THE CONNOR-WINFIELD CORP. 2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 851-5040. PHONE (630) 851-4722. WWW.CONWIN.COM PRODUCT D ATA SHEET CRYSTAL CONTROLLED OSCILLATORS ASOV5S3E CW 0713 SURFACE MOUNT STRATUM 3E HCMOS VCOCXO ABSOLUTE MAXIMUM RATINGS PARAMETER Storage Temperature Supply Voltage UNITS (Vcc) MINIMUM -40 -0.5 NOMINAL MAXIMUM 85 7 UNITS C Vdc TABLE 1.0 NOTE ASOV5S3E DESCRIPTION OPERATING SPECIFICATIONS PARAMETER Center Frequency Frequency Calibration Frequency vs. Temperature Stability Aging: Daily Aging: First Year Aging: Short Term (1Sec.) Aging: Long Term (20 Years) Operating Temperature Range Supply Voltage Frequency vs. Voltage Stability (+/-1%) Frequency vs. Load Stability (+/-20%) Power Consumption: Turn On Power Consumption: Steady-State Start-Up Time Warm Up 2G Tip-over TDEV at 300 seconds TDEV at 40 seconds (Fo) -0.2 -10 -1 -30 0 4.75 -0.5 -0.5 -100 MINIMUM NOMINAL 10 12.8 5.00E-11 5.00 MAXIMUM UNITS MHz ppm ppb ppb/day ppb RMS ppb C Vdc ppb ppb W W mS ppb ppb/G nS nS TABLE 2.0 NOTE 1 2 3 4 5 (Vcc) 0.2 10 1 30 300 70 5.25 0.5 0.5 2.75 1. 50 500 100 5 5 1 The Connor-Winfield ASOV5S3E is a 5V Surface Mount Voltage Controlled Oven Controlled Crystal Oscillator (VCOCXO) with an HCMOS output. The ASOV5S3E is designed for Stratum 3E applications requiring low jitter and tight frequency stability. 6 6 7 8 FEATURES INPUT CHARACTERISTICS PARAMETER Control Voltage (Pin 1) Deviation @ 25C referenced to Fo Input Impedance (Pin 1) Vc MINIMUM 0.5 0.3 50K NOMINAL 2.5 MAXIMUM 4.5 1.0 UNITS Vdc ppm Ohm TABLE 3.0 NOTE 9 VARIABLE FREQUENCY VCOCXO , DESIGNED TO MEET STRATUM 3E REQUIREMENTS FREQUENCY STABILITY 10ppb HCMOS OUTPUT CHARACTERISTICS PARAMETER LOAD Voltage (High) (Low) Duty Cycle at 50% of Vcc Rise / Fall Time 10% to 90% Spurious Output SSB Phase Noise at 1Hz offset SSB Phase Noise at 10Hz offset SSB Phase Noise at 100Hz offset SSB Phase Noise at 1KHz offset SSB Phase Noise at 10KHz offset MINIMUM 12 Vcc-0.2V 45 NOMINAL 15 50 MAXIMUM 18 0.2 55 5 -80 -90 -115 -130 -135 -140 UNITS pF Vdc Vdc % nS dBc dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz TABLE 4.0 NOTE 10 5.0V OPERATION HCMOS OUTPUT SURFACE MOUNT PACKAGE TAPE AND REEL PACKAGING RoHS 5/6 COMPLIANT (Voh) (Vol) ORDERING INFORMATION TABLE 5.0 NOTE 11 11 11 11 11 RESTABILIZATION TIME Off Time < 1 Hour < 6 Hours < 24 Hours 1 to 16 Days > 16 Days Restabilization Time < 2 Hours < 12 Hours < 48 Hours 48 Hours + 1/4 Off Time < 6 Days ASOV5S3E OCXO SERIES - 10.00MHz CENTER FREQUENCY Specifications subject to change without notice. DATA SHEET #: Cx031 PAGE 1 OF 2 REV: 02 DATE: 03/28/07 aCopyright 2001 Connor-Winfield all rights reserved. 10.00M THE CONNOR-WINFIELD CORP. 2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 851-5040. PHONE (630) 851-4722. WWW.CONWIN.COM PRODUCT D ATA SHEET Pin Connections Pin 1 2 6 7 8 9 10 11 12 13 14 15 16 Function Control Voltage Ground N/C Ground Vcc Vcc Ground Ground N/C Ground Output Ground N/C Dimensional Tolerance: .005 (.127mm) CRYSTAL CONTROLLED OSCILLATORS PACKAG E CHARACTERISTICS Package TABLE 6.0 Non-hermetic package consisting of an FR4 substrate with grounded metal cover. ENVIRONMNETAL CHARACTERISTICS TABLE 7.0 Shock 100G's, 6mS, halfsine per MIL-STD-202F, Method 213B, Test Condition C Vibration 0.06" D.A. or 10G peak 10 to 500 Hz, per MIL-STD-202F, Method 204D, Test condition A PROCESS RECOMMENDATIONS TABLE 8.0 Soldering Process See solder profile Wash Ultrasonic cleaning is not recommended. Notes: 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) 11) Labels will include the calibration frequency at the time of ship. Initial calibration @ 25C at the time of shipment, Vc=2.5Vdc. Overall frequency stability, 0 to 70C. After ten days of continuous operation. Allen Variance: 1 second, 100 average. Vcc = 5.0Vdc. From Vcc=90% of final value. No more than 16 transitions at star t-up before oscillator has started. Measured @ 0C, within 5 minutes, referenced one hour after turn-on. Positive slope HCMOS load. For a given off time, the time required to meet daily aging, short-term stability and TDEV requirements. Package Layout 12.7 Suggested Pad Layout DATE CODE .270 (6.85mm) ASOV5S3E .260 (6.60mm) 10.00M .260 (6.60mm) CW .270 (6.85mm) .260 (6.60mm) .360 (9.14mm) KEEP OUT AREAS (4 PLACES) Test Circuit Temperature 4.5V REF. SUPPLY Solder Profile 225C 183C 150C 100C Ramp-Up Rate 3C/second max. from 150C to 225C. 225C tp Ramp-Down Rate 6C/second max. 10 11 12 13 14 15 7 6 2 20K POT 25C 0 60-120s Max. 360 Sec. Max. 10-30s 60-150s Max. Time Specifications subject to change without notice. DATA SHEET #: Cx031 PAGE 2 OF 2 REV: 02 DATE: 03/28/07 aCopyright 2001 Connor-Winfield all rights reserved. |
Price & Availability of ASOV5S3E
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |